200kg Industrial Washer Extractor · main shot
main
side
drum
panel
▶ video
In stockHard Mount / Soft Mount
200kg Industrial Washer Extractor
Maximum capacity 200kg washer extractor for the largest commercial laundry plants. Engineered for 24/7 continuous operation with minimal downtime.
Key specs at a glance
| Capacity | 200 kg |
|---|---|
| Drum Volume | 2000 L |
| Motor Power | 22 kW · VFD drive |
| G-Force | 300-350 |
| Heating | Steam / Electric |
| Dimensions | 2200×1500×1800 |
⚡ Reply within 2 hours during business hours · Sample contracts & T/T accepted
🚢
FOB / CIF
All major ports
📦
3 per 40HQ
Wooden crate
🛠️
Parts Kit
6mo consumables
Specifications
Full technical data sheet.
Complete specs — nothing held back. Download the PDF for your engineering team.
Basic Parameters
| Wash capacity | 200 kg |
|---|---|
| Drum volume | 2000 L |
| Drum diameter | 1400 mm |
| Drum depth | 1300 mm |
| Extract speed | 900 rpm |
Motor & Drive
| Motor power | 22 kW |
|---|---|
| Drive type | Belt + frequency inverter |
Performance
| G-Force | 300-350 |
|---|---|
| Installation | Hard Mount / Soft Mount |
Heating & Water
| Heating | Steam / Electric |
|---|---|
| Water inlet | DN50 |
| Drain outlet | DN150 |
Electrical & Dimensions
| Voltage | 380V/50Hz |
|---|---|
| Dimensions (W×D×H) | 2200×1500×1800 |
| Net weight | 4500 kg |
See it running
Full wash cycle, on video.
Empty load → water fill → wash → high-speed extract → drain. 2–3 minutes, no editing.
Installation & what's included
Everything you need to get it running.
📦 What ships in the crate
- Main washer extractor unit× 1
- Inlet hoses (hot & cold)× 2
- Drain hose× 1
- Wearing parts kit (door seal, belts, shaft seals)1 set
- English installation & operation manual× 1
- Electrical wiring diagram× 1
🔧 Installation requirements
Foundation (hard mount): Reinforced concrete pad. Anchor bolts M20.
Foundation (soft mount): Level concrete floor, no special pad needed.
Power supply: 380V/50Hz 3-phase + neutral + ground.
Water: Cold + hot inlet, 0.2–0.4 MPa pressure.
Drainage: DN150 floor drain, 1:50 slope minimum.
Recommended clearance: 800 mm rear, 600 mm sides for service.
Interested in this machine?
Send us your requirements — capacity, heating, voltage, port — and we'll prepare a detailed FOB/CIF quote within 24 hours.
- ✓ Full FOB & CIF breakdown
- ✓ Lead time & shipping schedule
- ✓ Container loading plan
- ✓ Sample contract for review
Related guides